Detailed information on the added fluorine resin coated glass cloth surface carbon poly silicone type hydrocarbon feeling the pressure of adhesive products. AGF-100 FR of antistatic products. Not suitable for use by the impact of the project on static electricity. Uses heat seal machine, vacuum packaging machine separators, high temperature electric section covering smoke etc. Features ● maximum operating temperature of +200 degrees ● With antistatic effect. ● very good dimensional stability. ● non-adhesive, separation, slip of the belt surface, chemical resistance are outstanding. ● Current insulation is excellent. The average thickness of the general size of the table (mm) Width (mm) length (m) 0.13 13,19,25,30,38,50,100,150,200,250,300,400,500 10 0.18 13,19,25, 30,38,50,100,150,200,250,300,400,500 10 General Characteristics Table average thickness (mm) Width (mm) Length (m) the maximum temperature (℃) 0.04 4,5,8,10 , 5200 General characteristics table 13,15,20 article number average thickness (mm) Tensile Strength (N / 25mm) extension (%) 180 ° peel adhesion (N / 25mm) substrate dielectric breakdown voltage is (kV) AGF -100 FR 0.13 360 ─ 9 6 0.15 780 ─ 13 5 0.18 540 ─ 11 6 0.30 1220 ─ 14 6 AGF-100A 0.13 360 ─ 10 6 AGF-500-3 0.13 400 ─ 11 5 AGF-500-6 0.18 730 ─ 13 5 AGB-100 0.13 400 ─ 11 ─ 0.18 730 ─ 13 ─ AGB-500-6 0.18 730 ─ 13 ─ ASF-110 FR 0.08 70 180 7 10 0.13 160 180 8 15 0.18 250 180 9 18 0.23 340 180 10 21 ASF- 115 0.08 100 120 8 10 ASF-116F FR 0.04 40 110 3 5 ASF-118A FR 0.10 220 70 7 10 API-114A 0.06 150 70 6 7 0.08 240 70 8 10 AUE-112B 0.30 400 360 10 25 Test Method * - JIS -L-1096 JIS-L-1096 JIS-C-2107 values ??JIS-C-2107 icon above the measured value is not specified value. * Strength test method of tensile elongation test. ASF-110FR, ASF-115, ASF-116F FR, ASF-118A FR, AUE-112B: JIS-K-7137-2,